This unit can be wall mounted. It's specially designed for areas where floor space is not available. The  WM Series from Aquacooler is ideal for easy access by people in wheelchairs or for children at schools. This unit is stainless steel and has an 8 litre per hour chilling capacity, this unit also has the included extra of a glass filler.

" />

Aqua Cooler Stainless Steel Wall Mounted

Aquacooler Wall Mounted Drinking Fountain

$1,539.00
QTY:
Manufacturer:
AQUA COOLER Australia
Model:
A-WM3SS

This unit can be wall mounted. It's specially designed for areas where floor space is not available. The  WM Series from Aquacooler is ideal for easy access by people in wheelchairs or for children at schools. This unit is stainless steel and has an 8 litre per hour chilling capacity, this unit also has the included extra of a glass filler.

WM3 Bubbler & glass filler

 

  • stainless steel cabinet
  • Durable steel cabinets
  • Variable height for different applications
  • Adjustable water flow
  • Wall mounted to suit application

WATER RESERVOIR

A 0.5 litre tank is incorporated within the chilling chamber to meet peak use periods. The tank is fabricated from seamless hard drawn copper, tin plated for your safety. The chilling capacity is 8 l.p.h. during peak periods.

REFRIGERATION

The system uses 170gms of refrigerant R134A. It is non-toxic and non-flammable. The Refrigerant flow is controlled by capillary tube, there is no moving parts. The system is fitted within the suction line to give maximum heat exchange efficiency.

WATER FLOW CONTROL

The bubbler is rated to supply 1.71 l.p.m. at any mains pressure between 140 and 700 kPa. An automatic self-regulating control is fitted to overcome the problem of varying mains pressure.

WATER CONNECTIONS

Water inlet - 1/2" female B.S.P. Drain 40mm F.P.V.C. pipe.

TEMPERATURE CONTROL

The thermostat is factory pre-set.

COMPRESSOR

1/8 hp capacity, 90 watts. The compressor is hermetrically sealed for silent running.

CONDENSER

The condenser is of copper tube and expanded aluminium fin.

ELECTRICAL

240 volts, 50Hz. A 2 metre house cable and 3 pin plug are supplied. Full load current 1.06 amps.

PERFORMANCE TO ARI 1010-94 STANDARD

  • Inlet water - 26.7°C
  • Outlet water - 10°C
  • Ambient air - 32.2°C

WEIGHT

  • 31kg

WARRANTY

  • Twelve months comprehensive coverage.
  • Five years for compressor replacement.

 

INSTALLATION NOTE

 

•With water pressure above 700k Pa a pressure reduction valve should be fitted.

 

 

•There must be a minimum of 75 mm on both sides of the cooler to facilitate airflow.